Zimmer Tsv Scanbody

Production Introduction

zimmer tsv scanbody is suitable for intraoral and conventional use in the scanner. All scanbodies are made from titanium thus ensuring much higher precision and durability. The scanbodies with a special surface treatment can be sterilized and are labeled for better differentiation. The scanbodies are required when using titanium bases and also for designing custom abutments.     

zimmer tsv scanbody simple the dental implant position transfer and system-identification. It precisely secure the restorative position within a user-friendly experiences.

1. Auto-recognition

2. Multiple use

3. Autoclavable titanium materials

4. For implant level impression

The Attentions when using scanbody as below

1.The scanning of the bridge has high scanning requirements. If there is any defect in the implant, it needs to communicate with the customer in time to solve it. Avoid affecting the tightness of the bridge in the later stage

2.when scanning the scanbody

A.Clean the implant

B.Check that the scan body fits the implant

C.Check if the implant is shaken or if the screws are locked

D.Ensure that the scanbody is clean and the developer is sprayed evenly.

E.To ensure the scanning of the scan body is complete, to avoid the matching errors laterly

3.Gum scanning to ensure that the gums adhere to the model

4.The wax-up scan should pay attention to the fit on the model to avoid errors in the height of the bridge and the error of the gingival base of the bridge in the later stage.

5.If there are screw holes on the wax-up, you need to fill the holes with wax. Avoid inappropriate interface generation when calculating wax-up later

The process of zimmer tsv scanbody usage: 

Put the scanbody on the implant, and the surface information of the scanbody is obtained by optical impression technology to generate a virtual model. According to the size information of the scanpost, the spatial positional relationship between the scanpost and the implant site can be obtained. According to the virtual position information of the implant, the restoration can be designed or even printed by CAD/CAM technology. The correct location of implant transfer and its positional relationship with adjacent teeth or adjacent implants is very important for the design of restorations and the tightness of restorations, and precise restorations are necessary to avoid mechanical and biological complications and ensure The long-term success rate of implant therapy is also significant.

Digital impression techniques include:

1. direct intraoral scanning

2. Extraoral plaster mould scanning by the intraoral scanner or laboratory scanners

Influence of Scan Bar on Impression Accuracy:

Digital impression pick-up can be done by the original scan body, custom scanpost and abutment. Most of the original scanbodies used are mostly screw-retained cylindrical designs. there are also other design methods, such as short scanbody with an angle at the top. It should be noted that, whether it is intraoral or extraoral scanning, The scan body cannot be rigidly connected.

zimmer tsv scanbody Picture

zimmer tsv scanbody compatible system options:

Certification 

Packing & Delivery

Company Profile

Exhibition Photos:

Clinical Guidelines

1. Digital impression technology has been widely used in cases of implant-supported upper single crown restorations, and its accuracy has been demonstrated. Therefore, for implant-supported restoration of the upper single crown structure, digital impression technology can be used as a routine method in clinical practice.

2. The intraoral scanning method has an impact on the accuracy of digital impressions. Different brands of scanners have specific clinical operation methods, and the manufacturer's instructions should be followed during clinical operations.

3. In order to improve the accuracy of digital impression making, it is recommended to use the original scan bar for digital impression making.

4. For cases with large inter-implant spacing, digital impression taking is not yet recommended as a routine clinical technique.

5. For missing dentition and implant-supported superstructure restorations, digital impression taking is not recommended as a routine clinical technique.

Hot Tags: zimmer tsv scanbody, China, suppliers, manufacturers, factory, wholesale, buy, price, for sale, made in China